Choice and installation emergency lamp reserve exit 

This article will provide you with comprehensive information about the choice and installationemergency lamps of reserve output. We will consider different types of lamps, their characteristics, requirements for installation, and also answer frequently asked questions. You will learn how to ensure security and compliance with the standards, choosing the correctemergency lamp of the reserve outputFor your building.

Typesemergency lamps of reserve output

Autonomous meal lamps

Emergency lamps of reserve outputWith autonomous power, they work from built -in batteries. They automatically turn on when the main power supply is turned off. The service life of the battery is usually several hours, which is enough for safe evacuation. The choice of such a lamp guarantees uninterrupted work in emergency situations. Pay attention to the battery life specified by the manufacturer, and choose models with a sufficient margin of time for evacuation. On the market, models with various types of batteries are presented - for example, Nicd, Nimh, Lifepo4. Each of these types has its advantages and disadvantages in Terms of the service life, cost and environmental safety. Some models allow you to replace batteries, which increases the life of the lamp.

Centralized meal lamps

Theseemergency lamps of reserve outputConnected to a centralized emergency lighting system. When turning off electricity, they are powered by a reserve source of power supply. Such a system provides lighting the entire building, but requires professional installation and maintenance. In the case of using a centralized system, it is important to verify the reliability of the system and its regular maintenance. The system should include not only lamps, but also a reserve power system, batteries and controllers. The reliability of the entire system is critical in Emergency.

Combined meal lamps

Combinedemergency lamps of reserve outputCombine the advantages of both types. They can work both from an autonomous power source and from a centralized system. This provides additional reliability and safety. The choice of such a lamp will provide the highest level of reliability in emergency situations.

Installation requirementsemergency lamps of reserve output

Installationemergency lamps of reserve outputregulated by regulatory documents. The installation site should ensure a good visibility of the direction to the exit. Lamps should be located at a height that provides ease of use and good visibility. The distance between the lamps must comply with regulatory requirements, ensuring continuous lighting of the evacuation route. It is also necessary to take into account the possibility of quick and safe access to lamps for maintenance and replacement of batteries (if applicable).

The choice is suitableemergency lamp reserve exit

When choosingemergency lamp reserve exitThe following factors must be taken into account: the type of premises, the area of ​​the room, the required level of illumination, type of power source, reliability and service life. It is necessary to make sure in accordance with the lamp by the current regulatory documents and fire safety requirements. For large rooms, several lamps may be required to ensure a sufficient level of illumination. CompanyLLC Jiangman Zhishuntun Lightingoffers a wide selection of high -quality and reliableemergency lamps of reserve output.

Comparison table of various typesemergency lamps of reserve output

We hope this article helped you in choosing and installingemergency lamp of the reserve output. Remember, security is first of all!